China wholesaler Worm Screw Jack Lift Gearbox Worm Gear Screw Jack Lifter Mechanical Jack worm gear winch

Product Description

1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry

Screw Jacks in construction

Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.

Product Parameters

MODEL

 

SWL2.5

SWL5

SWL10

SWL15

SWL20

SWL25

SWL35

Maximum lifting force (kN)

 

25

50

100

150

200

250

350

Screw thread size

 

Tr30*6

Tr40*7

Tr58*12

Tr58*12

Tr65*12

Tr90*16

Tr100*20

Maximum tension (kN)

 

25

50

99

166

250

350

Worm gear ratio (mm)

P

1/6

1/8

3/23

1/8

3/32

3/32

 

M

1/24

1/24

1/24

1/24

1/32

1/32

Worm non rotating stroke (mm)

P

1.0

0.875

1.565

1.56

1.5

1.875

M

0.250

0.292

0.5

0.5

0.5

0.625

Maximum elongation of screw rod under tensile load (mm)

 

1500

2000

2500

3000

3500

4000

Maximum lifting height at maximum pressure load (mm)

The head of the screw rod is not guided

250

385

500

400

490

850

820

Lead screw head guide

400

770

1000

800

980

1700

1640

Worm torque at full load(N.m)

P

18

39.5

119

179

240

366

464

M

8.86

19.8

60

90

122

217

253

efficiency(%)

P

22

23

20.5

 

19.5

16

18

M

11

11.5

13

 

12.8

9

11

Weight without stroke(kg)

 

7.3

16.2

25

 

36

70.5

87

Weight of screw rod per 100mm(kg)

 

0.45

0.82

1.67

 

2.15

4.15

5.20

Detailed Photos

 

 

 

SWL Series worm screw Jack:

1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation

3.Self-locking function in the static state.

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Related Products

 

Packaging & Shipping

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

What are the advantages and disadvantages of using screw gears?

Using screw gears, also known as worm gears, offers several advantages and disadvantages. These gears have unique characteristics that make them suitable for specific applications but may also present limitations in certain scenarios. Here’s a detailed explanation of the advantages and disadvantages of using screw gears:

Advantages:

  • High Gear Ratio: Screw gears provide high gear ratios, meaning that a small rotation of the worm gear can result in a significant rotation of the worm wheel. This high gear ratio allows for precise control and slow movement, making screw gears suitable for applications that require fine adjustments and positioning accuracy.
  • Self-Locking: Screw gears have a self-locking characteristic, which means that they can hold their position without the need for additional braking mechanisms or external locking devices. This feature is particularly useful in applications where load holding or preventing back-driving is essential, such as in lifting systems or incline conveyors.
  • Compact Design: Screw gears have a compact design due to their single-threaded helical shape. This compactness allows for space-saving installations, making screw gears advantageous in applications with limited space or tight packaging requirements.
  • Quiet Operation: Screw gears typically operate with reduced noise levels compared to other gear types. The sliding contact between the worm gear and the worm wheel results in less gear mesh noise, making screw gears suitable for applications that require low noise levels or quiet operation.

Disadvantages:

  • Lower Mechanical Efficiency: Screw gears generally have lower mechanical efficiency compared to other gear types, such as spur gears or helical gears. The sliding motion between the worm gear and the worm wheel generates more friction, leading to energy losses and reduced efficiency. However, advancements in gear design, materials, and lubrication can help mitigate this disadvantage to some extent.
  • Limited Power Transmission Capacity: Screw gears are typically not suitable for high-power transmission applications. Due to the sliding contact and high gear ratios, they may have limitations in terms of torque capacity. In high-power applications, other gear types, such as spur or helical gears, are often preferred due to their higher load-carrying capabilities.
  • Potential Backlash: Screw gears can exhibit backlash, which refers to the play or clearance between the mating teeth of the worm gear and the worm wheel. Backlash can lead to reduced accuracy, vibration, and inefficient power transmission. Minimizing backlash through precise manufacturing and proper gear meshing is crucial to mitigate this issue.
  • Requires Proper Lubrication: Screw gears rely on adequate lubrication to minimize friction and ensure smooth operation. Proper lubrication is essential to prevent excessive wear, overheating, and premature failure. Regular maintenance and lubrication checks are necessary to maintain the efficiency and lifespan of screw gear systems.
  • Manufacturing Complexity: The manufacturing process of screw gears can be more complex compared to other gear types. Achieving precise gear tooth profiles and maintaining proper gear meshing requires careful machining and specialized equipment. This complexity can increase manufacturing costs and lead times.

When considering the use of screw gears, it is important to evaluate the specific requirements of the application, such as the need for high gear ratios, load capacity, positional accuracy, and noise levels. By carefully assessing the advantages and disadvantages, engineers can determine whether screw gears are the most suitable choice for their particular application.

screw gear

Can screw gears be used in automotive applications?

Yes, screw gears, also known as worm gears, can be used in various automotive applications. While other types of gears, such as spur gears and helical gears, are more commonly found in automotive systems, screw gears offer certain advantages that make them suitable for specific automotive applications. Here’s a detailed explanation of using screw gears in automotive applications:

  • Steering Systems: Screw gears are commonly used in automotive steering systems, particularly in rack and pinion steering systems. The worm gear and worm wheel arrangement provides a compact and efficient means of converting rotational motion into linear motion, allowing for precise and responsive steering control. Screw gears in steering systems can offer enhanced safety, reliability, and ease of operation.
  • Convertible Roof Mechanisms: Screw gears can be utilized in convertible roof mechanisms to facilitate the opening and closing of the roof. The self-locking characteristic of screw gears is advantageous in this application, as it helps to hold the roof securely in place without the need for additional locking mechanisms. Screw gears can provide smooth and controlled operation, ensuring reliable and convenient roof operation in convertible vehicles.
  • Power Seats and Adjustable Pedals: Automotive power seats and adjustable pedals often employ screw gears to enable precise positioning adjustments. The compact design and precise motion control of screw gears make them suitable for these applications. Screw gears can offer smooth and accurate seat adjustments, enhancing comfort and ergonomics for the vehicle occupants.
  • Accessory Drives: Screw gears can be utilized in automotive accessory drives, such as windshield wiper systems and HVAC (Heating, Ventilation, and Air Conditioning) systems. The self-locking feature of screw gears can be beneficial in maintaining the position of the wiper arms or controlling the position of HVAC blend doors. Screw gears can provide reliable and precise motion control for these auxiliary systems.
  • Brake Systems: Screw gears can be employed in certain automotive brake systems, such as parking brake mechanisms. The self-locking property of screw gears can help hold the brake in the engaged position, providing additional safety and preventing unintended movement. Screw gears in brake systems can contribute to reliable parking brake operation and vehicle stability while parked.
  • Electric Vehicle Applications: With the rise of electric vehicles (EVs), screw gears are being considered for various EV applications. They can be used in electric power steering systems, electric vehicle range extenders, and other drivetrain components. Screw gears can provide efficient power transmission and precise control, supporting the performance and functionality of electric vehicles.
  • Other Specific Applications: Screw gears can find application in other specialized automotive systems, depending on the specific requirements. For example, they may be used in adjustable headlight leveling systems, throttle control mechanisms, or other systems that require precise motion control and position holding.

While screw gears may not be as prevalent in automotive applications compared to other gear types, they offer unique characteristics that make them suitable for specific functions. By considering the design requirements, load conditions, and operational parameters, screw gears can be effectively employed in automotive systems to enhance functionality, safety, and user experience.

screw gear

What are the benefits of using a screw gear mechanism?

A screw gear mechanism, also known as a worm gear mechanism, offers several benefits that make it suitable for various applications. Here are some of the key advantages of using a screw gear mechanism:

  • High Gear Reduction Ratio: Screw gears provide a high gear reduction ratio, which allows for significant torque multiplication. This means that a small input torque can produce a much larger output torque, making screw gears ideal for applications that require high torque output and low-speed rotation.
  • Precise Positioning: Screw gears offer precise positioning capabilities due to their fine-pitch threads and high gear reduction ratio. This makes them well-suited for applications that require accurate and controlled motion control, such as robotics, automation, and positioning systems.
  • Self-Locking: One of the notable advantages of screw gears is their self-locking property. The friction between the worm and the worm wheel prevents the backdriving of the system when at rest, eliminating the need for additional braking mechanisms or external locks. This self-locking feature is particularly useful in applications where holding a position is crucial, such as elevators, lifts, and safety mechanisms.
  • Compact Design: Screw gear mechanisms have a compact design, making them suitable for applications with limited space. The worm and worm wheel configuration allows for a compact layout, enabling efficient power transmission in tight spaces where other types of gear mechanisms may not be feasible.
  • Quiet Operation: Screw gears typically operate more quietly compared to other gear types. The meshing of the helical threads results in smooth and gradual contact, reducing noise and vibration. This makes screw gear mechanisms desirable in applications where low noise levels are essential, such as in audio equipment, precision instruments, and residential environments.
  • High Shock Load Resistance: Screw gears are known for their ability to withstand shock loads. The helical nature of the threads and the larger contact area between the worm and the worm wheel distribute the load more evenly, reducing the risk of sudden failures or damage due to shock or impact loads.
  • Reliable and Durable: Screw gears are known for their reliability and durability. The simplicity of their design, with fewer moving parts, results in fewer points of failure. Additionally, the self-locking feature reduces the chances of unwanted movement or slippage. When properly lubricated and maintained, screw gear mechanisms can have a long service life and require minimal maintenance.
  • Versatility: Screw gears can be manufactured in various sizes, materials, and configurations to suit different applications. They can be designed as right-handed or left-handed, with different thread pitches and tooth profiles. This versatility allows for customization and adaptability to meet specific application requirements.

These benefits make screw gear mechanisms a popular choice in industries such as manufacturing, automotive, robotics, elevators, and various other applications where high torque, precise positioning, compactness, and reliability are crucial.

China wholesaler Worm Screw Jack Lift Gearbox Worm Gear Screw Jack Lifter Mechanical Jack worm gear winchChina wholesaler Worm Screw Jack Lift Gearbox Worm Gear Screw Jack Lifter Mechanical Jack worm gear winch
editor by CX 2023-09-25

Tags