China wholesaler Linear Manual Mechanical Landing Lifter Reducer Electric Worm Bevel Gear Lift Screw Jack Made in China with Great quality

Product Description

Customise Now

 

SWL series worm screw jack

 

 

Worm Screw Jack
Screw-Worm Jack or screw lift lifts widely used in machine building, metallurgy, construction, irrigation equipment and other industries, is starting up, and dropped through accessories advance, overturned and position adjustment and other functions at various altitudes. SWL is a worm screw-lift crane components foundation with compact structure, small size and light weight. Sources extensive, no noise, easy installation, the use of flexible, multi-function, supporting forms, high reliability, long life and many other advantages. Can be single or in combination, can be controlled accurately in accordance with certain procedures to enhance or promote the adjustment of height Motor power can be used directly or can also be manually operated. It’s a form of structure and assembly, and the height can be customized user requirements

Product Description
Technical data:
1. Lift speed: 150mm/min~1800mm/min
2. Input power:0.5 -21.8KW
3. Screw rang: 5-16 mm
4. Bearing range: 2T-100T
5. Structure: motor direct connection, single & double shaft
Characteristic:
Standardize & series design
Reverse operation

Product Parameters

Type

Model

Screw thread size

Max
lifting strength
kN

Max
pull force
kN

Weight without stroke
kg

Screw weight
per 100mm

SWL

Screw jack

SWL2.5

Tr30*6

25

25

7.3

0.45

SWL5

Tr40*7

50

50

16.2

0.82

SWL10/15

Tr58*12

100/150

99

25

1.67

SWL20

Tr65*12

200

166

36

2.15

SWL25

Tr90*16

250

250

70.5

4.15

SWL35

Tr100*18

350

350

87

5.20

SWL50

Tr120*20

500

500

420

7.45

SWL100

Tr160*23

1000

1000

1571

13.6

SWL120

Tr180*25

1200

1200

1350

17.3

1.Compact structure,Small size.Easy mounting,varied types.  Can be applied in 1 unit or multiple units.

2.High reliability.Long service life; With the function of   ascending,descending,thrusting,overturning

3.Wide motivity.It can be drived by  electrical motor and manual force.

4.It is usually used in low speed situation,widely used in the fields of
metallurgy,mechanical,construction,chemical,irrigation works,mediat treatment.

Detailed Photos

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Packaging & Shipping

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How do you address noise and vibration issues in a screw gear system?

Noise and vibration issues in a screw gear system can affect its performance, efficiency, and overall reliability. Addressing these issues is crucial to ensure smooth and quiet operation. Here’s a detailed explanation of how to address noise and vibration issues in a screw gear system:

  • Gear Design: The design of the screw gear system plays a significant role in minimizing noise and vibration. Proper gear tooth profile and geometry can help reduce meshing impact and ensure smooth engagement between the worm gear and the worm wheel. The selection of appropriate gear materials and surface finishes can also influence noise and vibration levels.
  • Gear Quality: High-quality manufacturing processes are essential to minimize noise and vibration in a screw gear system. Precise machining, grinding, and finishing techniques can help achieve accurate gear tooth profiles and reduce tooth surface irregularities. Using high-quality materials with appropriate hardness and strength can also contribute to smoother gear operation and reduced noise levels.
  • Lubrication: Adequate lubrication is crucial for reducing friction, wear, and noise in a screw gear system. Proper lubricant selection, considering factors such as viscosity and additives, can help minimize contact stresses and dampen vibrations. Regular lubricant maintenance, including monitoring oil levels and contamination, is necessary to ensure optimal performance and noise reduction.
  • Mounting and Alignment: Proper mounting and alignment of the screw gear system are essential to minimize noise and vibration. Misalignment or improper installation can cause uneven loading, increased friction, and excessive wear, leading to noise generation. Ensuring accurate alignment and proper mounting techniques, such as using precision shims and torque specifications, can significantly reduce noise and vibration levels.
  • Isolation and Damping: Implementing effective isolation and damping measures can help mitigate noise and vibration in a screw gear system. This can include using vibration-damping materials or isolating the system from surrounding structures using resilient mounts or bushings. Adding damping elements, such as rubber or elastomeric coatings, to critical components can also absorb vibrations and reduce noise transmission.
  • Load Distribution: Uneven load distribution can contribute to noise and vibration in a screw gear system. Optimizing the load distribution by adjusting gear parameters, such as the number of threads or the tooth lead angle, can help achieve a more balanced load sharing between the worm gear and the worm wheel. This can minimize tooth stresses and vibrations, resulting in reduced noise levels.
  • Regular Maintenance and Inspection: Ongoing maintenance and inspection are crucial for identifying and addressing potential noise and vibration issues in a screw gear system. Regularly checking for wear, damage, or misalignment, as well as monitoring noise and vibration levels, can help detect and resolve problems before they escalate. Prompt maintenance actions, such as lubricant replacement or gear realignment, can help maintain optimal system performance and reduce noise and vibration.

By implementing these measures, engineers and technicians can effectively address noise and vibration issues in a screw gear system, ensuring quieter operation, improved reliability, and enhanced overall performance.

screw gear

How do you retrofit an existing mechanical system with screw gears?

Retrofitting an existing mechanical system with screw gears, also known as worm gears, involves replacing or modifying the existing gear system to incorporate screw gears. Here’s a detailed explanation of the steps involved in retrofitting an existing mechanical system with screw gears:

  1. Evaluate the Existing System: Begin by evaluating the existing mechanical system to understand its design, function, and the specific requirements for retrofitting. Identify the type of gears currently in use and assess their limitations or shortcomings that warrant the retrofit. Consider factors such as load capacity, speed requirements, space constraints, and the desired performance improvements.
  2. Analyze Compatibility: Determine the compatibility of screw gears with the existing system. Consider factors such as available space, alignment requirements, torque and speed requirements, and the feasibility of integrating screw gears into the system. Assess whether any modifications or adaptations are needed to accommodate the screw gears effectively.
  3. Design Considerations: Based on the evaluation and compatibility analysis, develop a design plan for incorporating screw gears into the existing system. Consider aspects such as gear ratios, torque requirements, lubrication systems, mounting arrangements, and any necessary modifications to the system components or structure. Ensure that the design meets the specific performance and functional objectives of the retrofit.
  4. Select Screw Gear Components: Choose the appropriate screw gear components based on the design requirements and the specifications of the existing system. Consider factors such as gear material, tooth profile, helix angle, pitch diameter, and the number of starts. Select components that are compatible with the load, speed, and operating conditions of the retrofit application.
  5. Fabrication or Procurement: Once the screw gear components are selected, proceed with the fabrication or procurement of the required parts. This may involve manufacturing the screw gear components or purchasing them from a reliable supplier. Ensure that the components meet the specified quality standards and are suitable for the retrofit application.
  6. Installation: Install the screw gears into the existing mechanical system as per the design plan. This may involve removing the old gears and replacing them with the new screw gears or modifying the existing gear system to accommodate the screw gears. Follow proper installation procedures, ensuring correct alignment, lubrication, and torque specifications.
  7. Testing and Adjustment: After the installation, conduct thorough testing of the retrofitted system to verify its performance and functionality. Check for proper gear engagement, smooth operation, and the ability to handle the intended loads and speeds. Make any necessary adjustments or fine-tuning to optimize the performance of the retrofit and ensure its reliable operation.
  8. Documentation and Maintenance: Document the retrofit process, including design specifications, installation procedures, and any modifications made to the existing system. This documentation will be valuable for future reference, maintenance, and troubleshooting. Establish a regular maintenance schedule to inspect and maintain the retrofitted system, including lubrication, gear wear monitoring, and any recommended servicing.

Retrofitting an existing mechanical system with screw gears requires careful planning, design considerations, and proper execution. By following these steps and ensuring compatibility, proper component selection, and installation, it is possible to successfully integrate screw gears into an existing system, improving its performance, efficiency, and functionality.

screw gear

How do screw gears contribute to linear motion and power transmission?

Screw gears, also known as worm gears, play a significant role in achieving linear motion and power transmission in various mechanical systems. Here’s a detailed explanation of how screw gears contribute to these functions:

Linear Motion:

Screw gears can convert rotary motion into linear motion or vice versa through the interaction between the worm and the worm wheel. The helical threads on the worm and the teeth on the worm wheel create a sliding and rolling contact that results in linear displacement along the axis of the screw. This mechanism enables precise control and positioning of linear motion in different applications.

The linear motion contribution of screw gears can be observed in the following scenarios:

  • Lead Screw Mechanisms: When the worm gear is used as a lead screw, it converts the rotary motion of the worm into linear motion along the screw’s axis. By rotating the worm, the worm wheel moves linearly, allowing for controlled and precise linear positioning. Lead screw mechanisms are widely used in applications such as CNC machines, 3D printers, and linear actuators.
  • Linear Motion Conversion: In certain applications, the linear motion of a load can be converted into rotary motion using screw gears. By fixing the worm wheel and applying linear force to the worm, the rotation of the worm can drive the rotary motion of other components. This conversion is utilized in applications such as conveyor systems, lifting mechanisms, and material handling equipment.

Power Transmission:

Screw gears are effective in power transmission due to their unique characteristics. Here’s how they contribute to power transmission:

  • Gear Reduction: Screw gears provide significant gear reduction, which is the ratio between the input speed and the output speed. This reduction allows for a smaller input speed to generate a larger output torque, making screw gears suitable for applications requiring high torque and low-speed rotation. The gear reduction capability of screw gears enables efficient power transmission, especially in scenarios where high torque is necessary.
  • Torque Multiplication: Through the interaction of the helical threads on the worm and the teeth on the worm wheel, screw gears multiply torque. The mechanical advantage gained through the screw gear mechanism enables the transmission of higher torque to drive loads with increased force. This torque multiplication is essential in applications that require heavy lifting, load handling, and power transmission with minimal slippage.

By combining the ability to convert rotary motion into linear motion and providing efficient power transmission, screw gears find widespread use in a range of applications. They are employed in industries such as manufacturing, automation, robotics, material handling, and various other systems that require precise linear motion control and effective power transmission.

China wholesaler Linear Manual Mechanical Landing Lifter Reducer Electric Worm Bevel Gear Lift Screw Jack Made in China with Great qualityChina wholesaler Linear Manual Mechanical Landing Lifter Reducer Electric Worm Bevel Gear Lift Screw Jack Made in China with Great quality
editor by CX 2023-10-07

Tags