China Professional New Swl5t Trapezoidal Large Hand Manual Bevel Wheel Lift Worm Gear Screw Jack with Swl Series Rotating Mechanism hypoid bevel gear

Product Description

 

Top Quality Worm Gear Screw Jacks Load Up to 200 Ton

Machine& Ball Screw Jack Actuators

Features:

1. Suitable for heavy load, low speed and low frequency; 2. Main components: precision trapezoid screw pair and high precision worm gear pair; 3. Compact design, small volume, light weight, wide drive sources, low noise, easy operation, convenient maintenance. 4. The trapezoid screw has self-locking function, it can hold up load without braking device when screw stops traveling. 5. The lifting height can be adjusted according to customer requirements. 6. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 7. Top End: top plate, clevis end, threaded end, plain end

How to choose a suitable model?

Some questions can help you to choose.

Q1:Do you need screw jack of ball screw or trapezoidal screw?

Q2: How many Kg or Tons the screw jack need to lift or drop? The screw shaft length? How fast the lifting speed is ? Q3:Which the screw top?you need,as picture above?

Q4:Manual type (Hand wheel?driven) or electric motor driven type or both driven type?

 

Q5:Traveling screw (screw travelling up and down when working) or traveling nut ? (the nut travelling up and down when working),Upright or?Inverted?

Product Parameters

Type

Model

Screw thread size

Max
lifting strength
kN

Max
pull force
kN

Weight without stroke
kg

Screw weight
per 100mm

SWL

Screw jack

SWL2.5

Tr30*6

25

25

7.3

0.45

SWL5

Tr40*7

50

50

16.2

0.82

SWL10/15

Tr58*12

100/150

99

25

1.67

SWL20

Tr65*12

200

166

36

2.15

SWL25

Tr90*16

250

250

70.5

4.15

SWL35

Tr100*18

350

350

87

5.20

SWL50

Tr120*20

500

500

420

7.45

SWL100

Tr160*23

1000

1000

1571

13.6

SWL120

Tr180*25

1200

1200

1350

17.3

1.Compact structure,Small size.Easy mounting,varied types.  Can be applied in 1 unit or multiple units.

2.High reliability.Long service life; With the function of   ascending,descending,thrusting,overturning

3.Wide motivity.It can be drived by  electrical motor and manual force.

4.It is usually used in low speed situation,widely used in the fields of
metallurgy,mechanical,construction,chemical,irrigation works,mediat treatment.

Detailed Photos

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How do you maintain and service a screw gear system?

Maintaining and servicing a screw gear system, also known as a worm gear system, is essential to ensure its optimal performance, longevity, and reliability. Regular maintenance and proper servicing help identify and address issues before they escalate into major problems. Here’s a detailed explanation of how to maintain and service a screw gear system:

  1. Establish a Maintenance Schedule: Create a maintenance schedule for the screw gear system based on the manufacturer’s recommendations, operating conditions, and the system’s usage. The schedule should include routine inspections, lubrication, cleaning, and any other specific maintenance tasks.
  2. Visual Inspection: Regularly inspect the screw gear system visually. Check for any signs of wear, damage, misalignment, or unusual noise or vibration. Look for oil leaks, loose fasteners, or any other visible issues that may affect the performance of the system.
  3. Lubrication: Ensure that the screw gear system is properly lubricated. Monitor the lubricant level and condition regularly. Follow the manufacturer’s guidelines regarding the type of lubricant to use, the recommended viscosity, and the lubrication intervals. Replenish or replace the lubricant as necessary to maintain optimal lubrication and reduce friction.
  4. Cleaning: Keep the screw gear system clean and free from debris, dirt, or contaminants. Regularly clean the gears, shafts, and other components using appropriate cleaning methods and agents. Be careful not to damage any of the components during the cleaning process.
  5. Alignment Check: Periodically check the alignment of the screw gear system. Misalignment can lead to increased wear, reduced efficiency, and premature failure. Ensure that the worm gear and worm wheel are properly aligned axially and radially. If misalignment is detected, make the necessary adjustments to bring the gears back into proper alignment.
  6. Bearing Maintenance: If the screw gear system includes bearings, inspect and maintain them regularly. Check for any signs of wear, excessive play, or noise. Lubricate the bearings according to the manufacturer’s recommendations. Replace any worn or damaged bearings promptly.
  7. Load and Performance Testing: Periodically perform load and performance testing on the screw gear system. This helps assess its functionality, efficiency, and torque capacity. Analyze the test results and compare them to the system’s specifications. If any deviations or performance issues are identified, take appropriate measures to rectify them.
  8. Component Replacement: Over time, certain components of the screw gear system may wear out and require replacement. Keep a record of the system’s maintenance history and track the lifespan of critical components. Replace worn or damaged gears, bearings, seals, or other components as needed to ensure the system’s reliability and performance.
  9. Documentation: Maintain thorough documentation of all maintenance activities, including inspection reports, lubrication records, component replacements, and any repairs or adjustments made. This documentation helps track the system’s maintenance history, identify recurring issues, and plan future maintenance tasks.

It is important to note that the maintenance and service procedures may vary based on the specific screw gear system, its design, and the manufacturer’s recommendations. Therefore, always refer to the manufacturer’s documentation and guidelines for detailed instructions specific to the screw gear system being serviced.

screw gear

Can screw gears be used in both vertical and horizontal orientations?

Yes, screw gears, also known as worm gears, can be used in both vertical and horizontal orientations. The suitability of screw gears for a particular orientation depends on several factors. Here’s a detailed explanation of using screw gears in vertical and horizontal orientations:

Vertical Orientation:

Screw gears can be used in vertical orientations, such as when the worm gear is positioned vertically above or below the worm wheel. However, there are some considerations to keep in mind:

  • Self-Locking Capability: One advantage of screw gears is their self-locking capability, which means they can hold position without additional braking mechanisms. In vertical orientations, this self-locking feature can be beneficial, especially when the load needs to be held in position without the need for external support or brakes.
  • Lubrication: Proper lubrication is crucial in vertical screw gear applications to ensure efficient power transmission and minimize wear. Gravity can affect lubricant distribution, so it is essential to use lubricants with appropriate viscosity and ensure adequate lubrication reaches all gear surfaces even in a vertical configuration.
  • Load and Torque: The weight of the load being transmitted through the screw gear system is an important consideration in vertical orientations. Vertical applications often involve lifting or supporting heavy loads, and the torque requirements can be high. It is important to ensure that the screw gear system is designed to handle the specific load and torque demands of the vertical application.

Horizontal Orientation:

Screw gears can also be used in horizontal orientations, where the worm gear and worm wheel are positioned parallel to the ground. Here are some considerations for using screw gears in horizontal orientations:

  • Lubrication: Proper lubrication is still important in horizontal screw gear applications to minimize friction, wear, and heat generation. The lubricant viscosity and type should be chosen to provide adequate film thickness and reduce sliding friction between the gear surfaces.
  • Efficiency: Screw gears generally have lower mechanical efficiency compared to some other gear types. In horizontal orientations, where efficiency is critical for power transmission, it is important to consider the gear design and material selection to minimize energy losses and maximize the overall system efficiency.
  • Load Distribution: In horizontal orientations, the load distribution between the worm gear and the worm wheel is typically more uniform compared to vertical orientations. This can help reduce tooth stresses and increase the overall stability of the gear system.
  • Mounting and Support: Proper mounting and support of the screw gear system are important in horizontal orientations to ensure alignment and minimize vibrations. Adequate support structures, such as rigid bases or frames, should be used to maintain the gear system’s stability and integrity.

In summary, screw gears can be used in both vertical and horizontal orientations. However, the specific application requirements, including load, torque, lubrication, and efficiency considerations, should be carefully evaluated to ensure the screw gear system is suitable and designed to meet the demands of the particular orientation.

screw gear

What industries commonly use screw gears?

Screw gears, also known as worm gears, find applications in a variety of industries due to their unique characteristics and functionalities. The following are some of the industries that commonly use screw gears:

  • Manufacturing and Machinery: The manufacturing and machinery industry extensively utilizes screw gears in various equipment and machinery. Screw gears are commonly found in gearboxes and power transmission systems, providing speed reduction and torque multiplication. They are used in conveyor systems, packaging machines, material handling equipment, and other industrial machinery that require controlled motion and high gear ratios.
  • Automotive: The automotive industry utilizes screw gears in specific applications, most notably in steering mechanisms. Screw gears are employed in worm and sector steering gears to convert the rotational motion of the steering wheel into the linear motion required for turning the vehicle’s wheels. The self-locking property of screw gears is advantageous in maintaining the position of the wheels after steering input.
  • Elevators and Lifts: Screw gears are widely used in the elevator and lift industry for vertical transportation systems. They play a crucial role in the elevator hoisting mechanism, where the rotational motion of the motor is converted into vertical movement. The high gear reduction ratio provided by screw gears enables controlled and precise lifting operations in elevators and lifts.
  • Valve and Actuation Systems: Screw gears have significant applications in industries that involve valve control and actuation. They are utilized in valve actuators to convert rotational motion into linear motion for precise positioning of valve stems. Screw gears are commonly found in water treatment plants, oil refineries, chemical processing facilities, and other industries that require accurate flow control and fluid system management.
  • Robotics and Automation: Screw gears play a vital role in robotics and automation systems. They are utilized in robot joints and robotic arm mechanisms to provide precise movement and positioning. Screw gears enable controlled and repeatable motion, making them suitable for applications that require accurate manipulation, such as assembly lines, pick-and-place machines, and robotic surgery systems.
  • Camera and Optics: The camera and optics industry utilizes screw gears in lens control systems. Screw gears are employed for focus adjustment, zooming, and aperture control in camera lenses and telescope mechanisms. The precise movement provided by screw gears enables accurate focusing, zooming, and optical alignment, contributing to high-quality image capture and optical performance.
  • Medical Equipment: Screw gears find applications in the medical equipment industry, particularly in devices that require controlled and precise movement. They are used in surgical robots, prosthetic limbs, medical imaging devices, and other medical instruments. Screw gears enable accurate motion control and positioning, while their self-locking property is advantageous for maintaining stable positions and preventing undesired movement.
  • Security Systems: Screw gears are utilized in security systems, including combination locks and safes. They provide the mechanical advantage necessary for rotating the locking mechanisms and ensuring secure operation. The self-locking property of screw gears adds an extra layer of security by preventing unauthorized access through reverse rotation or manipulation.

These are just a few examples of the industries that commonly use screw gears. The unique capabilities of screw gears, such as high gear ratios, precise motion control, and self-locking functionality, make them valuable in various sectors where efficient power transmission, accurate positioning, and controlled movement are essential.

China Professional New Swl5t Trapezoidal Large Hand Manual Bevel Wheel Lift Worm Gear Screw Jack with Swl Series Rotating Mechanism hypoid bevel gearChina Professional New Swl5t Trapezoidal Large Hand Manual Bevel Wheel Lift Worm Gear Screw Jack with Swl Series Rotating Mechanism hypoid bevel gear
editor by CX 2023-10-07

Tags