Product Description
Swl Series Stainless Steel Worm Gear Linear Motion Mechanical Lift Electric Screw Jack Worm Gear Reducer Worm Gear Screw Jack
Product Description
Our Jack’s Advantages:
-Self-locking ability
-Can be driven directly by motor or other power or manual
-Can be customized according user’s demand
-Compact configuration, small size, lightweight
-Convenient installation, flexible operation
-High reliability and stability
-2 Sets, 3 Sets, 4 Sets, 8 Sets etc. Screw Jacks to linkage to use ( Screw Jacks Linkage Use Application, see the below)
Technical data
1. Lift speed: 150mm/min~1800mm/min
2. Input power:0.5 -21.8KW
3. Screw rang: 5-16 mm
4. Bearing range: 2T-100T
5. Structure: motor direct connection, single & double shaft
Model |
SWL2.5 |
SWL5 |
SWL10 |
SWL15 |
SWL20 |
SWL25 |
SWL35 |
Max Capacity (KN) |
25 |
20 |
100 |
150 |
200 |
250 |
350 |
Lifting screw |
Tr30*6 |
Tr40*7 |
Tr58*12 |
Tr58*12 |
Tr65*12 |
Tr90*16 |
Tr100*20 |
Ratio (P) |
6:1 |
8:1 |
23:3 |
23:3 |
8:1 |
32:3 |
32:3 |
Ratio (M) |
24:1 |
24:1 |
24:1 |
24:1 |
24:1 |
32:1 |
32:1 |
Raise per revolution (mm) (P) |
1.0 |
0.875 |
1.565 |
1.565 |
1.56 |
1.5 |
1.875 |
Raise per revolution (mm) (M) |
0.250 |
0.292 |
0.5 |
0.5 |
0.5 |
0.5 |
0.625 |
Start torque on lifting screw at max load |
250 |
385 |
500 |
400 |
490 |
850 |
820 |
400 |
770 |
1000 |
800 |
980 |
1700 |
1640 |
|
Starting torque/Handwind torque at max load (Nm) (P) |
18 |
39.5 |
119 |
179 |
240 |
368 |
464 |
Starting torque/Handwind torque at max load (Nm)(M) |
8.86 |
19.8 |
60 |
90 |
122 |
217 |
253 |
Running efficiency (%)(P) |
33 |
23 |
20.5 |
20.5 |
19.5 |
16 |
18 |
Running efficiency (%) (M) |
11 |
11.5 |
13 |
13 |
12.8 |
9 |
11 |
Weight without spindle or protection tube (Kg) |
7.3 |
16.2 |
25 |
25 |
36 |
70.5 |
87 |
Weight of lifting screw 100 mm (kg) |
0.45 |
0.82 |
1.67 |
1.67 |
2.15 |
4.15 |
5.20 |
Lubrication |
ZGN-1 or ZGN-2 (-20-+100) |
||||||
Grease quantity |
0.1 |
0.3 |
0.5 |
0.5 |
0.75 |
1.1 |
1.9 |
Click here for more models!
Related Products
Our Company
Ever-power specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.
The company provides a reliable gurantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite processing technology and strict control system.
In recent years, the company has been developing rapidly by its rich experience in production, adcanced managemant system, standardized management system, strong technical force. We always adhere the concept of survial by quality, and decelopment by innovation in science and technology.
Ever-power Group is willing to work with you hand in hand and create brilliance together!
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
---|---|
Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Step: | Steel |
Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
---|
Are screw gears suitable for high-torque applications?
Using screw gears, also known as worm gears, in high-torque applications requires careful consideration. The torque capacity of screw gears can be a limiting factor due to their unique design and characteristics. Here’s a detailed explanation of the suitability of screw gears for high-torque applications:
Yes, screw gears can be suitable for high-torque applications, but there are certain limitations to consider:
- Lower Torque Capacity: Screw gears generally have a lower torque capacity compared to other gear types, such as spur gears or helical gears. The sliding contact between the worm gear and worm wheel, coupled with the high gear ratios typically associated with screw gears, can result in higher contact stresses and increased wear. Therefore, screw gears are generally not the first choice for applications with extremely high torque requirements.
- Efficiency and Heat Generation: In high-torque applications, the efficiency of the gear system becomes crucial. Screw gears, due to their sliding motion and higher friction compared to other gear types, can have lower mechanical efficiency. This lower efficiency leads to increased heat generation, which may be a concern in high-torque applications where heat dissipation becomes challenging. Proper lubrication, cooling, and heat management strategies are important to ensure reliable operation under high torque conditions.
- Load Distribution: The load distribution in a screw gear mechanism is not as uniform as in some other gear types. The load is concentrated on a limited number of teeth, which can lead to higher tooth stresses and potential wear. This concentration of load can be a limiting factor in high-torque applications, as it can result in premature gear failure or reduced lifespan.
- Application-Specific Considerations: While screw gears may have limitations in high-torque applications, there are scenarios where they can still be suitable. For example, in applications that require precise positioning, heavy loads, or the ability to hold position without additional braking mechanisms, the self-locking feature of screw gears can be advantageous. Additionally, advancements in gear design, materials, and lubrication can help improve the torque capacity and performance of screw gears in specific high-torque applications.
When considering the use of screw gears in high-torque applications, it is important to carefully evaluate the specific torque requirements, operating conditions, and other factors such as speed, duty cycle, and environmental considerations. Consulting with experienced engineers and conducting thorough analysis will help determine whether screw gears are suitable or if alternative gear types should be considered to meet the high-torque demands of the application.
Can screw gears be used in heavy-duty machinery and equipment?
Yes, screw gears, also known as worm gears, can be used in heavy-duty machinery and equipment. Screw gears offer several advantages that make them suitable for such applications. Here’s a detailed explanation of using screw gears in heavy-duty machinery and equipment:
- High Load Capacity: Screw gears are known for their high load-carrying capacity. The helical design of the gear teeth allows for distributed contact between the worm gear and the worm wheel, enabling them to handle significant loads. This makes screw gears well-suited for heavy-duty applications where large forces and torque need to be transmitted.
- Self-Locking Capability: Screw gears have a self-locking feature, which means they can hold position without the need for additional braking mechanisms. In heavy-duty machinery and equipment, this self-locking capability can be advantageous, especially when it is necessary to prevent the load from moving or to maintain position under static or dynamic loads.
- Compact Design: Screw gears have a compact design, which allows for space-saving installations in heavy-duty machinery and equipment. Their axial orientation and the ability to achieve high gear ratios in a single stage contribute to their compactness. This is particularly beneficial in applications where space is limited or where a compact gear system is desirable.
- Smooth and Quiet Operation: Screw gears generally operate with low noise and vibration levels. The helical nature of the gear teeth engagement results in smooth and continuous contact, reducing noise and minimizing vibrations. This is advantageous in heavy-duty machinery and equipment, where quiet operation is often desired to enhance operator comfort and minimize the impact on surrounding components.
- High Gear Reduction Ratios: Screw gears can achieve high gear reduction ratios in a single stage, which is beneficial in heavy-duty applications that require significant speed reduction or torque multiplication. This eliminates the need for multiple gear stages or additional components, simplifying the gear system design and reducing the overall complexity.
- Durability and Longevity: Screw gears are known for their durability and long service life. When properly designed, manufactured, and maintained, they can withstand heavy loads, operate under challenging conditions, and exhibit good resistance to wear and fatigue. This makes them suitable for heavy-duty machinery and equipment that operate in demanding environments.
- Compatibility with Various Materials: Screw gears can be manufactured from different materials to suit specific application requirements. This flexibility allows for compatibility with various other components and materials used in heavy-duty machinery and equipment. The choice of materials can be tailored to factors such as strength, wear resistance, and compatibility with lubricants or operating conditions.
In summary, screw gears can be effectively used in heavy-duty machinery and equipment due to their high load capacity, self-locking capability, compact design, smooth operation, high gear reduction ratios, durability, and compatibility with different materials. By considering the specific requirements of the application and employing proper design and manufacturing practices, screw gears can provide reliable and efficient power transmission in heavy-duty scenarios.
What is a screw gear and how does it work?
A screw gear, also known as a worm gear, is a type of gear mechanism that consists of a screw-like gear (called the worm) and a toothed wheel (called the worm wheel or worm gear). The screw gear operates on the principle of a helical screw driving a toothed wheel to transmit rotational motion and power. Here is a detailed explanation of how a screw gear works:
- Configuration: The screw gear consists of two main components: the worm and the worm wheel. The worm is a cylindrical gear with a helical thread wrapped around it, resembling a screw. The worm wheel is a toothed wheel that meshes with the worm. The orientation of the helical thread on the worm and the teeth on the worm wheel is typically perpendicular to each other.
- Meshing: The worm and the worm wheel mesh together by engaging the helical thread of the worm with the teeth of the worm wheel. The helical thread on the worm acts as a screw, and as the worm rotates, it drives the rotation of the worm wheel. The teeth on the worm wheel provide the necessary contact points for the meshing action.
- Transmitting Motion: When the worm rotates, the helical thread transfers rotational motion to the worm wheel. The helical thread of the worm pushes against the teeth of the worm wheel, causing the worm wheel to rotate. The direction of rotation of the worm wheel depends on the helix angle and the direction of rotation of the worm. The gear ratio between the worm and the worm wheel is determined by the number of teeth on the worm wheel and the pitch of the helical thread on the worm.
- Mechanical Advantage: One of the key characteristics of a screw gear is its ability to provide a high mechanical advantage or gear ratio. The helical design of the worm and the worm wheel allows for a large number of teeth to be engaged at any given time, resulting in a high gear ratio. This makes screw gears suitable for applications that require a significant reduction in rotational speed or an increase in torque.
- Self-Locking: A unique property of screw gears is their self-locking capability. Due to the helical thread design, the friction between the worm and the worm wheel tends to hold the gear system in place when the worm is not rotating. This self-locking characteristic prevents the worm wheel from backdriving the worm. It provides inherent braking or locking action, making screw gears suitable for applications where holding position or preventing reverse rotation is necessary.
- Efficiency and Lubrication: Screw gears generally have lower efficiency compared to other types of gears due to the sliding action between the helical thread and the teeth of the worm wheel. The sliding motion results in higher friction and heat generation. Proper lubrication is essential to minimize wear and improve efficiency. Lubricants with good adhesion and boundary lubrication properties are commonly used for screw gears.
Screw gears are widely used in various applications, including machinery, automotive systems, conveyor systems, lifting equipment, and many others. Their unique characteristics of high gear ratio, self-locking capability, and compact design make them suitable for specific applications where precise motion control, torque multiplication, or holding position is required.
editor by CX 2023-09-06