China high quality Manual and Electric Worm Gear Screw Jack Worm Screw Lift Reducer Types of Lift Machine bevel gearbox

Product Description

Manual and Electric Worm Gear Screw Jack Worm Screw Lift Reducer Types of Lift Machine

 

Product  Description

 

Our Jack’s Advantages:

-Self-locking ability
-Can be driven directly by motor or other power or manual
-Can be customized according user’s demand
-Compact configuration, small size, lightweight
-Convenient installation, flexible operation
-High reliability and stability
-2 Sets, 3 Sets, 4 Sets, 8 Sets etc. Screw Jacks to linkage to use ( Screw Jacks Linkage Use Application, see the below)

Technical data

1. Lift speed: 150mm/min~1800mm/min
2. Input power:0.5 -21.8KW
3. Screw rang: 5-16 mm
4. Bearing range: 2T-100T
5. Structure: motor direct connection, single & double shaft

Model

SWL2.5

SWL5

SWL10

SWL15

SWL20

SWL25

SWL35

Max Capacity (KN)

25

20

100

150

200

250

350

Lifting screw

Tr30*6

Tr40*7

Tr58*12

Tr58*12

Tr65*12

Tr90*16

Tr100*20

Ratio (P)

6:1

8:1

23:3

23:3

8:1

32:3

32:3

Ratio (M)

24:1

24:1

24:1

24:1

24:1

32:1

32:1

Raise per revolution (mm) (P)

1.0

0.875

1.565

1.565

1.56

1.5

1.875

Raise per revolution (mm) (M)

0.250

0.292

0.5

0.5

0.5

0.5

0.625

Start torque on lifting screw at max load

250

385

500

400

490

850

820

400

770

1000

800

980

1700

1640

Starting torque/Handwind torque at max load (Nm) (P)

18

39.5

119

179

240

368

464

Starting torque/Handwind torque at max load (Nm)(M)

8.86

19.8

60

90

122

217

253

Running efficiency (%)(P)

33

23

20.5

20.5

19.5

16

18

Running efficiency (%) (M)

11

11.5

13

13

12.8

9

11

Weight without spindle or protection tube (Kg)

7.3

16.2

25

25

36

70.5

87

Weight of lifting screw 100 mm (kg)

0.45

0.82

1.67

1.67

2.15

4.15

5.20

Lubrication

ZGN-1 or ZGN-2 (-20-+100)

Grease quantity

0.1

0.3

0.5

0.5

0.75

1.1

1.9

Click here for more models!
 

Related Products

Our Company

Ever-power specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.
The company provides a reliable gurantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite processing technology and strict control system.
In recent years, the company has been developing rapidly by its rich experience in production, adcanced managemant system, standardized management system, strong technical force. We always adhere the concept of survial by quality, and decelopment by innovation in science and technology.
Ever-power Group is willing to work with you hand in hand and create brilliance together! 
 

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

What lubrication is required for screw gears?

Proper lubrication is essential for the efficient and reliable operation of screw gears, also known as worm gears. The lubrication requirements for screw gears depend on various factors, including the application, operating conditions, and the materials used in the gear system. Here’s a detailed explanation of the lubrication considerations for screw gears:

Selection of Lubricant:

When selecting a lubricant for screw gears, it is important to consider the following factors:

  • Type of Lubricant: There are different types of lubricants available, such as oils, greases, and solid lubricants. The selection depends on factors such as operating speed, temperature range, load capacity, and environmental conditions. Consult the gear manufacturer’s recommendations or industry standards to determine the suitable lubricant type for the specific application.
  • Viscosity: The lubricant viscosity should be chosen based on the operating conditions of the screw gear system. Higher viscosity lubricants are typically used for heavier loads or higher temperatures, while lower viscosity lubricants are suitable for lighter loads or lower temperatures. The viscosity should be within the range recommended by the gear manufacturer.
  • Additives: Some lubricants contain additives that provide additional benefits, such as improved anti-wear properties, corrosion resistance, or extreme pressure protection. Consider the specific requirements of the screw gear system and choose a lubricant with suitable additives, if necessary.

Lubrication Guidelines:

Here are some general guidelines for lubricating screw gears:

  • Initial Lubrication: Apply an appropriate amount of lubricant during the initial installation of the screw gear system. Ensure that all gear surfaces, including the worm and the worm wheel, are adequately coated with lubricant.
  • Replenishment: Regularly monitor the lubricant level and condition of the screw gear system. Over time, lubricant may degrade, become contaminated, or lose its effectiveness. Follow the manufacturer’s recommendations for lubricant replenishment intervals and quantities. In some cases, lubricant replenishment may be necessary during routine maintenance.
  • Proper Lubricant Distribution: Ensure that the lubricant is evenly distributed across the contacting surfaces of the screw gears. The lubricant should adequately cover the threads of the worm and the teeth of the worm wheel to reduce friction and wear. Proper lubricant distribution can be achieved through rotational movement of the gears or by applying the lubricant directly to the contact area.
  • Prevent Excessive Lubrication: While proper lubrication is essential, excessive lubrication can lead to problems such as overheating, increased drag, and leakage. Follow the manufacturer’s recommendations regarding the appropriate lubricant quantity. Avoid over-greasing or over-oiling the screw gear system.
  • Cleanliness: Maintain cleanliness when lubricating screw gears. Ensure that the lubrication equipment, such as grease guns or oilers, is clean and free from contaminants. Contaminants, such as dirt or debris, can compromise the lubricant’s performance and increase wear on the gears.

It is important to note that the lubrication requirements may vary based on the specific screw gear system and its operating conditions. Therefore, always refer to the gear manufacturer’s recommendations and guidelines for the most accurate and up-to-date information regarding lubrication requirements.

screw gear

Can screw gears be used in automotive applications?

Yes, screw gears, also known as worm gears, can be used in various automotive applications. While other types of gears, such as spur gears and helical gears, are more commonly found in automotive systems, screw gears offer certain advantages that make them suitable for specific automotive applications. Here’s a detailed explanation of using screw gears in automotive applications:

  • Steering Systems: Screw gears are commonly used in automotive steering systems, particularly in rack and pinion steering systems. The worm gear and worm wheel arrangement provides a compact and efficient means of converting rotational motion into linear motion, allowing for precise and responsive steering control. Screw gears in steering systems can offer enhanced safety, reliability, and ease of operation.
  • Convertible Roof Mechanisms: Screw gears can be utilized in convertible roof mechanisms to facilitate the opening and closing of the roof. The self-locking characteristic of screw gears is advantageous in this application, as it helps to hold the roof securely in place without the need for additional locking mechanisms. Screw gears can provide smooth and controlled operation, ensuring reliable and convenient roof operation in convertible vehicles.
  • Power Seats and Adjustable Pedals: Automotive power seats and adjustable pedals often employ screw gears to enable precise positioning adjustments. The compact design and precise motion control of screw gears make them suitable for these applications. Screw gears can offer smooth and accurate seat adjustments, enhancing comfort and ergonomics for the vehicle occupants.
  • Accessory Drives: Screw gears can be utilized in automotive accessory drives, such as windshield wiper systems and HVAC (Heating, Ventilation, and Air Conditioning) systems. The self-locking feature of screw gears can be beneficial in maintaining the position of the wiper arms or controlling the position of HVAC blend doors. Screw gears can provide reliable and precise motion control for these auxiliary systems.
  • Brake Systems: Screw gears can be employed in certain automotive brake systems, such as parking brake mechanisms. The self-locking property of screw gears can help hold the brake in the engaged position, providing additional safety and preventing unintended movement. Screw gears in brake systems can contribute to reliable parking brake operation and vehicle stability while parked.
  • Electric Vehicle Applications: With the rise of electric vehicles (EVs), screw gears are being considered for various EV applications. They can be used in electric power steering systems, electric vehicle range extenders, and other drivetrain components. Screw gears can provide efficient power transmission and precise control, supporting the performance and functionality of electric vehicles.
  • Other Specific Applications: Screw gears can find application in other specialized automotive systems, depending on the specific requirements. For example, they may be used in adjustable headlight leveling systems, throttle control mechanisms, or other systems that require precise motion control and position holding.

While screw gears may not be as prevalent in automotive applications compared to other gear types, they offer unique characteristics that make them suitable for specific functions. By considering the design requirements, load conditions, and operational parameters, screw gears can be effectively employed in automotive systems to enhance functionality, safety, and user experience.

screw gear

Are there different types of screw gears available?

Yes, there are different types of screw gears available, each with its variations in design and functionality. These variations cater to specific applications and requirements. Here are some of the commonly used types of screw gears:

  • Single-Thread Worm Gears: Single-thread worm gears have a single helical thread on the worm. They provide a relatively higher gear ratio and are commonly used in applications requiring moderate torque and precision positioning. Single-thread worm gears are widely employed in industries such as manufacturing, automotive, and machinery.
  • Multi-Thread Worm Gears: Multi-thread worm gears have multiple helical threads on the worm, typically two or more. The presence of multiple threads increases the contact area and allows for higher torque transmission. Multi-thread worm gears offer higher gear reduction ratios and are suitable for applications requiring greater torque multiplication, such as heavy-duty machinery and high-load lifting systems.
  • Fine-Pitch Worm Gears: Fine-pitch worm gears have a smaller pitch, meaning there are more teeth per unit length of the worm. This design allows for finer control and precise positioning. Fine-pitch worm gears find applications in industries where accurate motion control is critical, such as robotics, automation, and optics.
  • Coarse-Pitch Worm Gears: Coarse-pitch worm gears have a larger pitch, resulting in fewer teeth per unit length of the worm. This design provides higher torque transmission and is suitable for applications requiring heavy-duty power transmission. Coarse-pitch worm gears are commonly used in industries like manufacturing, material handling, and conveyors.
  • Right-Handed and Left-Handed Worm Gears: Screw gears can be classified as right-handed or left-handed based on the direction of the helical thread. In a right-handed worm gear, the helical thread advances in a clockwise direction when viewed from the end of the worm. In a left-handed worm gear, the helical thread advances counterclockwise. The choice between right-handed and left-handed worm gears depends on the specific application and the desired rotational direction.
  • Non-Throated and Throated Worm Gears: Non-throated worm gears have a cylindrical worm without a groove, while throated worm gears have a groove or a notch on the worm. The presence of a throat allows for greater contact between the worm and the worm wheel, increasing the gear meshing efficiency and load-carrying capacity. Throated worm gears are commonly used in applications where higher efficiency and load capacity are required.
  • Self-Locking Worm Gears: Self-locking worm gears are designed to have a high self-locking capability. The helical thread angle and the friction between the worm and the worm wheel prevent the worm wheel from backdriving the worm when the system is at rest. Self-locking worm gears are widely used in applications that require holding a position without the need for additional braking or locking mechanisms, such as elevators, lifts, and positioning systems.

These are some of the different types of screw gears available in the market. The selection of a specific type depends on factors such as torque requirements, gear reduction ratio, precision positioning, load capacity, and self-locking capabilities, among others. Understanding the characteristics and variations of screw gears allows for choosing the most suitable type for a given application.

China high quality Manual and Electric Worm Gear Screw Jack Worm Screw Lift Reducer Types of Lift Machine bevel gearboxChina high quality Manual and Electric Worm Gear Screw Jack Worm Screw Lift Reducer Types of Lift Machine bevel gearbox
editor by Dream 2024-05-14

Tags