China Forged Assembly Driven Gear and Shaft spurs gear

Item Description

MaHangZhou CZPT Technology Co., Ltd. has the ability to promise the quality for each phase, from raw content (forging), then heating treatment, ultimately machining. We have our personal forging mill, heating teatment store and machining store. At present we could offer different of lage major axles and shaft, turbin shaft, cylinder shaft, windy generator shaft, roller shaft, wheel forging, drill bit forging and varieties of irregular parts based on the drawing presented by clients.

Metal materials for shaft and forging elements:
 

Engineering Steel  
GB
GB/T 700
JIS
JIS G3101
DIN (W-Nr.)
EN10571-2 / DIN17100
AISI/ASTM
ASTM A36
BS Other folks
Q235B SS400 S235JR / RST37-2 A36    
Q235C   S235J0 / ST37-3 U      
Q235D   S235J2      
GB
GB/T1591
JIS DIN (W-Nr.)
EN10571-2 / DIN17100
AISI/ASTM BS Other people
Q355B   S355JR      
Q355C   S355J0 / ST52-3U      
Q355D   S355J2 / ST52-3 N      
Q355E   S355K2      
GB
GB/T 699
JIS
JIS G4051
DIN (W-Nr.)
EN 10083-2
AISI/ASTM
ASTM A20
BS Other folks
      1018 EN2C  
20 S20C C20 1571 EN3B/070M20 ASTM A105
35 S35C C30 1035    
forty five S45C C45E/1.1191 1045 EN8D/080M40  
fifty S50C C50/1.1206 1050 080M50  
55 S55C C55 1055 EN9/070M55  
GB
GB/T 3077
JIS
JIS G4105/JIS G4103
DIN (W-Nr.)
EN 15710
AISI/ASTM
ASTM A29
BS
BS 970
Other individuals
40Cr SCr440 41Cr4(1.7035) 5140    
15CrMo SCM415 16CrMo44/1.7337      
20CrMo SCM420 18CrMo4/1.7243 4118    
30CrMo SCM430 25CrMo4/1.7218 4130 708A25/708M25  
42CrMo SCM440 42crmo4/1.7225 4140 EN19/709M40  
  SCM445   4145    
40CrNiMoA SNCM 439/SNCM8 36CrNiMo4/1.6511 4340 EN24/817M40  
    40NiMoCr10-5/1.6745   EN26/826M40  
    34CrNiMo6 / 1.6582 4337    
    30CrNiMo16-6/1.6747 4330V EN30B/835M30  
    32CrMo12/1.7361   EN40B/722M24  
16CrMnH / 20CrMnTi   16MnCr5 / 1.7131 5115    
20CrMn   20MnCr5 / 1.7147      
    15CrNi6/1.5919 3115    
    16NiCr4/1.5714   EN351/637M17  
      4615/4617 EN34/665M17  
    14NiCr14/1.5752 3310/3415 EN36/655M13  
    15NiCrMo16-5/1.6723   EN39/835M15  
17CrNiMo6   18CrNiMo7-6 (1.6587) 4815    
20CrNiMo SNCM220 1.6523/21NiCrMo2 8620 805M20  
    20CrNiMo5   EN353  
GCr15 SUJ2 52100/1.3505   EN31/535A99  
38CrMoAl SACM645 41CrAlMo7/34CrAlMo5   905M39/905M31 41CrAlMo74(ISO)

 

 

 Rear Axles 10 Wheel Hub Bolts lage primary axles

We King Rail had been previously engaged in exporting steel railway wheels , axles ,bearings and other forging goods for about twelve many years, components are a great variety of hot cast, hot rolled and cold drawn Steels,  including engineering metal, cold work device steel, scorching perform tool metal, plastic mildew metal, spring steel, large velocity metal, stainless metal and so on., in addition to King Rail also has their personal heating therapy shop and machining store to supply heating therapy, slicing and more machining service.

Because 2012 year,  we has the proper to export all Cast Steel behalf of MaHangZhou CZPT Technology Co., Ltd. which is specialised in melting and forging of unique steel given that 1965 calendar year, now King Rail is 1 of the largest maker of forged item in China.The cast items are utilized in Automotive, Aerospace, Energy Era, Oil & Gas, Transportation and Industrial. 

Until 2013 year, several consumers need Sizzling ROLLED and Cold DRAWN metal from Masteel Industrial, in buy to provide a single-stop remedy to our consumers,  started to cooperate with Xihu (West Lake) Dis.bei Specific Steel (HangZhou and HangZhou mill), Baosteel, Tiangong Worldwide, Changcheng Special Steel for hot rolled tool metal, cooperate with HangZhou Speical Metal, HangZhou HangZhou Speical Metal, Shagang Group, CZPT Team for scorching rolled engineering metal. Now we presently established up the warehouse in ZheJiang and ZheJiang Metropolis, much more than 20000 tons ex-stock could be equipped with varieties of dimensions.

Then from 2018 year, King Rail decide to give further maker processing support, at present we could provide various of lage main shaft, turbin shaft, cylinder shaft, windy generator shaft, roller shaft, wheel forging, drill little bit forging and kinds of irregular elements based on the drawing supplied by buyers.

King Rail  is the specialist one-stop steel maker and trader, stockist and exporter in China, our consumers distribute all in excess of the entire world, include West Europe, North America, South The us, Asia, Middle Asia, Africa, Australia, and so on.

The business owns innovative unique steel smelting services and forging processing equipments, the main metal-producing equipment incorporate 2 sets of 50t ultra-substantial power electric arc furnaces,2 sets of 60t LF refining furnaces,1 established of 60t vacuum degassing refining CZPT and 4 sets of 1-20t electroslag re-melting furnaces.
The principal forging equipments largely incorporate:3 sets of 5t electro-hydraulic hammers, 1 set of substantial-speed forging models of 800t,1600t,2000t and 4500t respectively.

For Even more Details, You should Speak to Me Below Now!
 

US $100-1,000
/ Piece
|
10 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

After-sales Service: Free After Service
Warranty: Free After Service
Customized: Customized

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Engineering Steel  
GB
GB/T 700
JIS
JIS G3101
DIN (W-Nr.)
EN10025-2 / DIN17100
AISI/ASTM
ASTM A36
BS OTHERS
Q235B SS400 S235JR / RST37-2 A36    
Q235C   S235J0 / ST37-3 U      
Q235D   S235J2      
GB
GB/T1591
JIS DIN (W-Nr.)
EN10025-2 / DIN17100
AISI/ASTM BS OTHERS
Q355B   S355JR      
Q355C   S355J0 / ST52-3U      
Q355D   S355J2 / ST52-3 N      
Q355E   S355K2      
GB
GB/T 699
JIS
JIS G4051
DIN (W-Nr.)
EN 10083-2
AISI/ASTM
ASTM A20
BS OTHERS
      1018 EN2C  
20 S20C C20 1020 EN3B/070M20 ASTM A105
35 S35C C30 1035    
45 S45C C45E/1.1191 1045 EN8D/080M40  
50 S50C C50/1.1206 1050 080M50  
55 S55C C55 1055 EN9/070M55  
GB
GB/T 3077
JIS
JIS G4105/JIS G4103
DIN (W-Nr.)
EN 10250
AISI/ASTM
ASTM A29
BS
BS 970
OTHERS
40Cr SCr440 41Cr4(1.7035) 5140    
15CrMo SCM415 16CrMo44/1.7337      
20CrMo SCM420 18CrMo4/1.7243 4118    
30CrMo SCM430 25CrMo4/1.7218 4130 708A25/708M25  
42CrMo SCM440 42crmo4/1.7225 4140 EN19/709M40  
  SCM445   4145    
40CrNiMoA SNCM 439/SNCM8 36CrNiMo4/1.6511 4340 EN24/817M40  
    40NiMoCr10-5/1.6745   EN26/826M40  
    34CrNiMo6 / 1.6582 4337    
    30CrNiMo16-6/1.6747 4330V EN30B/835M30  
    32CrMo12/1.7361   EN40B/722M24  
16CrMnH / 20CrMnTi   16MnCr5 / 1.7131 5115    
20CrMn   20MnCr5 / 1.7147      
    15CrNi6/1.5919 3115    
    16NiCr4/1.5714   EN351/637M17  
      4615/4617 EN34/665M17  
    14NiCr14/1.5752 3310/3415 EN36/655M13  
    15NiCrMo16-5/1.6723   EN39/835M15  
17CrNiMo6   18CrNiMo7-6 (1.6587) 4815    
20CrNiMo SNCM220 1.6523/21NiCrMo2 8620 805M20  
    20CrNiMo5   EN353  
GCr15 SUJ2 52100/1.3505   EN31/535A99  
38CrMoAl SACM645 41CrAlMo7/34CrAlMo5   905M39/905M31 41CrAlMo74(ISO)

###

 
US $100-1,000
/ Piece
|
10 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

After-sales Service: Free After Service
Warranty: Free After Service
Customized: Customized

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Engineering Steel  
GB
GB/T 700
JIS
JIS G3101
DIN (W-Nr.)
EN10025-2 / DIN17100
AISI/ASTM
ASTM A36
BS OTHERS
Q235B SS400 S235JR / RST37-2 A36    
Q235C   S235J0 / ST37-3 U      
Q235D   S235J2      
GB
GB/T1591
JIS DIN (W-Nr.)
EN10025-2 / DIN17100
AISI/ASTM BS OTHERS
Q355B   S355JR      
Q355C   S355J0 / ST52-3U      
Q355D   S355J2 / ST52-3 N      
Q355E   S355K2      
GB
GB/T 699
JIS
JIS G4051
DIN (W-Nr.)
EN 10083-2
AISI/ASTM
ASTM A20
BS OTHERS
      1018 EN2C  
20 S20C C20 1020 EN3B/070M20 ASTM A105
35 S35C C30 1035    
45 S45C C45E/1.1191 1045 EN8D/080M40  
50 S50C C50/1.1206 1050 080M50  
55 S55C C55 1055 EN9/070M55  
GB
GB/T 3077
JIS
JIS G4105/JIS G4103
DIN (W-Nr.)
EN 10250
AISI/ASTM
ASTM A29
BS
BS 970
OTHERS
40Cr SCr440 41Cr4(1.7035) 5140    
15CrMo SCM415 16CrMo44/1.7337      
20CrMo SCM420 18CrMo4/1.7243 4118    
30CrMo SCM430 25CrMo4/1.7218 4130 708A25/708M25  
42CrMo SCM440 42crmo4/1.7225 4140 EN19/709M40  
  SCM445   4145    
40CrNiMoA SNCM 439/SNCM8 36CrNiMo4/1.6511 4340 EN24/817M40  
    40NiMoCr10-5/1.6745   EN26/826M40  
    34CrNiMo6 / 1.6582 4337    
    30CrNiMo16-6/1.6747 4330V EN30B/835M30  
    32CrMo12/1.7361   EN40B/722M24  
16CrMnH / 20CrMnTi   16MnCr5 / 1.7131 5115    
20CrMn   20MnCr5 / 1.7147      
    15CrNi6/1.5919 3115    
    16NiCr4/1.5714   EN351/637M17  
      4615/4617 EN34/665M17  
    14NiCr14/1.5752 3310/3415 EN36/655M13  
    15NiCrMo16-5/1.6723   EN39/835M15  
17CrNiMo6   18CrNiMo7-6 (1.6587) 4815    
20CrNiMo SNCM220 1.6523/21NiCrMo2 8620 805M20  
    20CrNiMo5   EN353  
GCr15 SUJ2 52100/1.3505   EN31/535A99  
38CrMoAl SACM645 41CrAlMo7/34CrAlMo5   905M39/905M31 41CrAlMo74(ISO)

###

 

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Gear

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China Forged Assembly Driven Gear and Shaft     spurs gearChina Forged Assembly Driven Gear and Shaft     spurs gear
editor by czh 2023-01-31